Quote:
Originally Posted by West Valley G
When I put the lever in Reverse or forward either way it actually binds up the brake so that it will not engage. It binds the pedal right at the place where it should be engaging. As long as I leave the hydro lever in N the brake works fine. As soon as I use the lever the brake binds up.
Ken
|
A picture of the trunnion plate and associated linkage might bring to light the binding problem. I believe the return to neutral rod is offset to one side of the centerline. I'm talking about the end with the two pins that fit into the slots in the plates. Maybe it has to be flipped 180° to better line up through it's entire line of motion.