I too, am not familiar with the 2518 either.
From that video, NO that is not normal.
As an educated guess, check to see if the Pivot Pin Nut is loose. If that is tight, then I am guessing of lack of Maintenance (no grease) has wallowed out the hole in the Axle (719-3095), as well, as the Pivot Pin (938-3110) being worn.
I would suggest jacking the front end up, removing the axle, and do an inspection on the Pivot Hole and Pin for wear.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|