[Ambush]

I have a 149 and a #2 tiller but the mounting bracket is missing. I won't be using the corner drive (belt) so I want to fab the tiller arm mounting bracket.
I'll also fab a sleeve hitch set up based on that mount.

If someone has one of these brackets, I'd really appreciate if they could take a couple of measurements for me.

The width, outside to outside and material thickness.

Height of the bracket.

The distance between the top arm mounting pin and the two bottom holes (on the side of the bracket)

The distance from those holes to the back side of the mounting bracket.

I've searched the forums and the net and anything I can find, the links or pics are dead. But on the brightside, I've learned a lot from traveling down all the "rabbit holes" the search has taken me. I'm very impressed with some of the top quality work down by some guys. I'm also impressed with some of the ingenuity, if not always the execution of some projects, basically good old raw redneck!

Great site for a Cub newby. And I'll definitely do a pictorial of the process and progress. Thanks!