First, welcome to OCC.... 
Quote:
|
It did nothing when I turned the key no click or anything. I did notice that my PTO switch was engaged so I clicked that off and then it started up. Next day it fired up fine, Tried one more time, and after this try it would not start at all. Same thing no click, but lights turn on and everything else works. I've tested all the safety switches and checked battery voltage all those things appear to be OK. I also jumped the starter across the solenoid and it turned over but didn't start
|
Sounds like an issue(s) with the PTO switch itself, or one of the safety switches.
Quote:
|
I also jumped the starter across the solenoid and it turned over but didn't start.
|
It will not start up unless the Ignition Switch is in the "on or run" position.
Quote:
|
I ordered some of those little black relays as my previous cub blew one of those and the PTO wouldn't engage.
|
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|