Hello, I've had some success on my research about the brakes on this machine, so I am posting here to hopefully help any future person who is looking for brake parts
I recently purchased a 2nd machine that has all the original brake parts. The previous owner was the original purchaser and still had the owners manual and registration card for the warranty!!
Currently, the brakes on this 2nd machine of mine do not function, but I believe they just need new pads and proper bleeding to work. (all parts are there)
While this post will not tell you where to buy rotor/hubs, I can give you dimensions and pictures of the hubs (might be able to find a local machine shop that can fabricate them, I am looking now myself)
I can give part numbers and pictures for the calipers. THESE ARE DIFFERENT THAN THE CUB CADET PART NUMBERS IN THE SCHEMATICS AND PARTS ARE STILL AVAILABLE TO PURCHASE NEW!!!
The company that made these brake calipers is "Tol-o-matic". Here is their contact information:
3800 County Road 116, Hamel, MN 55340
https://www.tolomatic.com/ • Email:
Help@Tolomatic.com
Phone: (763) 478-8000 • Fax: (763) 478-8080 • Toll Free: 1-800-328-2174
On my machine here are part numbers:
Front Brake Calipers:
Part Number 07080018 (Assy number H10DACG)
"friction Puck" (brake pad) for this caliper is 0708-1051
Rear Brake Calipers:
Part Number 07240028 (mine are not marked with Assy number; but through research I have found they are H20SAFCG)
"friction Puck" (brake pad) for this caliper is 0708-1051
When speaking to the tech-support for Tolomatic, it looks like they did not make a specific "build sheet" for these calipers, but they did confirm the correct friction-puck part number. I've attached build sheets they did give me for similar brake calipers on here so everybody has access; they can help you see how these are assembled. Please note, one of the PDF files was too large so I had to take screenshots and shrink them down; makes it hard to read. If anyone needs these in the original format, please reach out to me and I can email them to you
I will add more posts to include pictures of the brakes/labels on my machine.
I will also add more posts to have pictures of the hub/rotor assembly with dimensions.
I hope this helps somebody out!!