Quote:
Originally Posted by Cubcadet_107
Depends on a couple things. Thermostat is in a case just before the return line. Seems to be decently accessible with the hood removed, however if I need to drain coolant to do this it's not going to be an easy task...
Plus on such short notice I don't have a thermostat handy, nor a new gasket for the case its in. Not sure if you can free up thermostats or not but I'd rather replace,,, making a gasket is easy enough though. Is it a generic thermostat, or a specific one for IH?
|
Buy the right one for your application. There is a drain from the bottom of the rad to easily catch the coolant.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, 42" Blade, 020" Over K301 * 1711 | 50C Deck, #1 Rototiller w/ Extensions, Sleeve Hitch, CH18S * 1811 | 46 GT Deck, 42" Blade, M18, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck * 1914 | 44C Deck, KT17 Series II * 127 * 1650 Twin Stick | 50C Deck, 42QA Snow Thrower, K341 * 1862
|