First, welcome to OCC......... 
Two things I would look at. (1) Look under the Tunnel Cover and make sure all you linkages are connected and move correctly. (2) It is a common problem, that the "spirol pin" on the Coupler to the Hydrostat Transmission breaks, then you have nothing. Look closely to see if the "input" shaft of the hydrostat, turns or revolves at the same speed as the drive shaft.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|