Quote:
Originally Posted by Sam Mac
I suggest that you contact the supplier.
|
The supplier (Small Engine Warehouse) emails;
"John, I attached the adapter drawing "it looks like bolts are 1/4 by 20 thread" you might try to find some 3/4" spacers or washers. I don't have any spec for the clutch you might try the tractor dealer for this info. Thank you"
So I ordered some 1/4" x 1-1/4" thick fender washers and longer bolts from Amazon to fill the 3/4" gap from the engine to the driveshaft flex connector. I found in my supply of nuts and bolts, a longer bolt to attach the PTO clutch.