Quote:
Originally Posted by finsruskw
All the QL's I have ever had used 3/8" fuel line from the tank to the carb elbow.
Is the shut off leaking or is it that you need a new grommet/bushing in the tank?
The valve has a filter as part of the assembly and is a friction fit in this bushing.
You will have to replace the elbow as well if you go with a smaller fuel line.
From the parts book:
Ref:
9
N/A
Hose | (Use 9.62 inch of 3/8 hose from bulk roll marked IH-117310-C1)
|
After closer inspection, it was the seal that was leaking, not the valve. I had a spare one from the last time I replaced it.
If anyone has a quiet line, and you don't use 9.62 inches of fuel line, the line will interfere with the throttle valve operation....ask me how I know...