Just little update on the project. Got all insides of the engine put back in
. I sure love knowing that all that is clean and closed up.
Got a little break in the weather yesterday so I was able to do some painting.
Had a fire going in the warm side of shop. I would roll the engine out to
the unheated side. Put a coat of paint on and then roll back to the warm side.
After what seemed like an awful bunch a trips I had er done.
I found some engine high temp primer and put it down first. Then followed
with Case Iron Guard in Federal Yellow. I am not much of stickler for the
perfect color but was quite impressed how well it matched the original.
Hopefully today will be get the flywheel and PTO back on. Static time it
on the bench. Then we are pretty darn close to putting it back in the frame.
Hope you guys are well and enjoying some spring. There is something
quite special when the potential for new things growing starts to look
like it is really going to happen.
Ken
DSCN2013.jpg
DSCN2015.jpg
DSCN2019.jpg
DSCN2029.jpg
DSCN2032.jpg