Quote:
Originally Posted by EternalArianne
Ok jumper cable from battery + terminal to lug on starter makes it spin, so starter is good.
I even unplugged the entire starting circuit and ran a straight wire from the ignition switch to the solenoid, still just a thunk.
My only other thing I can try is a wire straight from the battery + to the solenoid start pin, bypassing the entire circuit. I may try that later unless anyone else has suggestions. Seems like every time I think I've got it and it starts multiple tries, then it stops again and I'm back to pulling my hair out!
|
ok, starter is good.
Put a Bat + to small terminal on sol as you mentioned, if starter spins, back track with that hot wire following the wiring diagram, till the starter no longer spins then you will have isolated the problem.
Have you cleaned the wire ends (female) on the ignition switch plug, as well as switch terminals? (male spades) they are a known problem area, especially the hot lead from the battery.
Don't pull your hair out, Ha,LOL! you are getting closer to the Cheese, and when you find it, much joy will result,----- and you will find it.