Quote:
Originally Posted by EternalArianne
Ok if I jumper the hot lug to the start pin on the solenoid, it only intermittently spins the starter. Most times it's just a thunk. If I jumper the hot lug to the starter lug, the starter spins every time without fail.
This happened with both the old and new solenoids.
|
ok now we are getting somewhere, it could be the new sol is bad but it could be the big wire ends are not clean to pass enough current through the sol terminals but easily passes current when jumped by touching the wire lugs but no able through the terminal bolts.
do some inspection there.