Both of the relief valves are up. We pushed them down while it was running and the right hand one stayed down and the left hand one came back up (like it should). We took the right one out to push the valve back to the up position and put it back in, but it still did not work. The charge pump is installed correctly, I drew lines with sharpie on the case to make sure everything went back together properly. We did take the hydro apart internally to a certain extent. We split the hydro case and was able to change the trunnion with out moving anything else internally. We were sure to keep the area clean. We did not have the manual to look at to reassemble it, but we used several diagrams to make sure it went together the way it came apart.
|