Should be able to replace the missing finger and bushing on the 3 pin driver if it is not cracked around the center spring plate. On edit: :Looks like there is something else missing from the center of the 3 pin driver as well.
The clutch throw out lever can be resurfaced with no problems as well as the clutch plates themselves.
Other than that you will have to buy the clutch disc, throw out bearing and driveshaft if it is gouged and worn from the spring riding on it.
Oh yes, and the bearing surfaces in the clutch lever hanger and throw out lever may need attention as well.
Many of these gear drive Cubs have really been abused
Good luck!
|