Quote:
Originally Posted by danfeste
Found the problem. The big pin in the rear lift was too long, its the pin for using a 400 tiller so it was 1 1/2 longer than a normal pin. It was causing the adaptor to drop down to far, and then the adaptor would hit the straps when it came up. For anyone else setting up a 782 for plowing, to get a plowing depth of 6" I used the bottom holes on the lower 3 point bracket, and the middle hole on the adaptor lifting straps. That's with the tractor hydraulic lift all the way down and using a 10" plow.
|
I'll try this out. Thanks (zombie thread).
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
|