More than likely the cork gasket between the pump and the trans is leaking. You can check by cleaning up the area then run the tractor. The leak will show up a lot easier than guessing.
If it is not the pump, you will have to remove trans, the pump, the filter and such, then remove the welch plug down at the bottom by the suction tube, remove the ring retainer holding the bearing in, then remove the 6 bolts holding the cover on. The sillycone will make it hard to separate but it will come apart. No parts will fall out.
The parts diagrams show what is in that area of the tranny.
__________________
Up to 533 and counting...
I give up updating my profile!
|