Buy a can or two of aerosol carb cleaner. I spray the all the orifices and journals over a pan, then pour the liquid into a jar with a mouth big enough to put the carb body through. All the little parts go into the jar along with the body. If you have a rubber float needle seat take that out!!
Let the carb soak overnight, then use wire to push through all the journals and orifices. Torch tip cleaning wires are cheap and easy to find and a set will have every size you need. Then spray again with the aerosol, then compressed air.
Don't be cheap with the carb cleaner.
Set the float level properly.
|