I had the same issue on one of my 1641's. I didn't have a set of Cub wheels so I used a set of JD wheels, the hub is about 1/4" longer on the JD wheels so I had my local machine shop make me a set of spacers. You can adjust the 1/4" dimension to suit your needs. You can also use washers as was mentioned. McMaster sells 1" OD X 1/2" ID washers.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|