04-09-2023, 11:08 PM
|
 |
Senior Member
|
|
Join Date: May 2020
Location: Elkland, PA
Posts: 752
|
|
I fixed the implement handle float pin. I drilled out the broken piece, and tapped it for 10-24. I made the pin from a machine screw since these pins are getting scarce and expensive. I capped it off just as original.
__________________
 
582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
|