Quote:
Originally Posted by beancent
Good news. I was looking at the wiring schematic and noticed the reverse relay in order to have the relay energized, needed to see a ground at the gray wire
(terminal 85 ). So I checked for that ground and did not see it. So I made up a connection from terminal 85 to ground and was able to run the PTO on the "on" position.
|
Do you have a URL for the schematic handy? I'm horrible at reading them, but guess I need to.
My Cub has all the safety crap bypassed by the PO. PTO worked last fall, and this spring will not stay on.
-- I can turn the PTO on, but it will not STAY on. I can hold the PTO switch on with a Vice Grip (and need to today so I can mow before I have to bale)
It's possible I bumped something when I rebuilt my steering pump, but unless a mouse chewed something I can't see....
Found my fuse issue, I had a 1.5a, not 15 amp. I guess I need cheaters finally..
Also, I checked and I do not have a violet wire in my PTO switch bundle. Is there a way to just install a simple on/of switch?
