Quote:
Originally Posted by Oak
All 3000 series machines from 1998 to the end of the run use the vacuum pto system. I believe this system is far better than the electric or mechanical type used on earlier and later machines. I also think the design of the pto system is better. Parts are not an issue. I currently have (5) 3000 series machines and have replaced 1 actuator, disassembled 1 vacuum solenoid to clean it and replaced the plastic bushings for the pto idler arm. Other than these simple repairs they have been pretty trouble free.
|
It seems like a more durable system, but not as well supported (probably due to the short life/low volume application).
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
|