42” cast end deck on a 122
Hi All,
I have a 42” cast-end pin-on (not quick-attach) deck mounted on my 122. The deck is way out of level from side to side. I determined the problem is that my rock shaft is twisted so one of the arms is about 1/2” lower than the other. I’m thinking I can level it out with a shorter link arm on one side. The link arms I have (p/n 959-3095) are about 2.25” from the pin to the end of the slot (see my photo). I see that there is a different link (p/n ih-478875-r91) for a different deck hanger for an Original that looks like it might be shorter. Does anyone have one that they could measure for me? Thanks!
|