I use Hy-Tran on most of my tractors. If I am working on a tractor, I use the fluid from TSC that is made to B6 specs. Like Rex stated, drain it hot. Fill through the filler tube under the seat.
One trick I learned was to get a small tube and run it down in the fill tube. Just down enough to clear the tube, you do not want it to be down so far that it touches the oil. This will keep the oil from burping up in the tube while you are pouring the oil. Very small, a 4mm poly air line works great.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo.
|