This is a steering wheel model. Just set the tire pressure yesterday to 20 front and 10 rear. I greased all the fittings on front wheels and two related to steering. I pulled the floor plan and verified no debris. There was less than a handful, to make sure, blew everything out with air. Mowed the yard and it started off seeming like it was better, however after mowing around several trees and wit stripping, started feeling hard to steer again and continued through the rest of the mowing. Should I go higher on front tire pressure? Max is 28, so I was thinking maybe 25. The toughest part is from straight until about 90 degrees going either way. This may be normal, but on flat ground on the grass, it would take two hands pulling pretty hard to turn the tires
|