[IHCubCadet147]

Originally Posted by CubDieselFan

I had the same thing happen with my 1572 when I first got it. Any kind of a load and it would fall on its face. Changed both filters and it was all good.

I changed both of them yesterday. I wish it would stop raining so I could go try it.

Originally Posted by Oak

Those tank screens can get clogged up but if your fuel pump isn't running then that's your problem. I've used those cheap China pumps from Scamazon too and so far they seemed to work okay as long as it's rated for diesel fuel.

Here is the free manual from this site on your engine. It explains how to purge the filters and pump on page 1-93.

https://www.onlycubcadets.net/forum/...ead.php?t=4660

Here's a list of the filters I use on the Kubota D600 & D640's.

I use Rotella T 15W-40 oil and Wix filters part #
Air - 46270
Pre fuel - 33972
Fuel - 33389
Engine Oil - 51064
Hydro - 51410

Thanks for the link and the filter numbers. My new pump is supposed to be here Tuesday. If that doesn’t fix it I’ll check the screen in the tank next.

Originally Posted by Oak

Some of the early 882 & 782D's had the original fuel pump from Kubota left on them. It is not needed and can be bypassed if your machine has it.

You may need to crack the injector lines at the top of the engine one at a time to bleed any air out of the high pressure pump if any got in there. I wouldn't do that unless you have to.

Here is a pic of one of my 882's with the original Kubota fuel pump with the blue arrow pointing to it. The yellow arrow is where you can bleed the fuel lines and filter from.

Attachment 115319

Mine only has the electric pump.