re: steering problem on my 102
I Solved the steering issue a few weeks back. And today, I went over my 102, cleaned the soot off the spark plug, checked head bolts and tightened a couple of them. ALso noticed a rear pivot bolt on the starter generator had snapped. I was able to use a screw extractor to remove the broken off bolt and replaced it. Thoroughly enjoyed the job too. So simple are these machines! I also cleaned the outside of the engine and carb, aired up the tires in front (3 bar type) and checked the rears (turfs) added 30 weight to the rear end, and then had some fun mulching leaves and hauling a bunch of old rail road ties to a spot for the disposal guys to more easily load them. I adore this machine!
|