PTO problem?
Hi Guys, I have an issue with my PTO or maybe switch. I have a Series 2000 model 2155. About 5 or 6 weeks ago I engaged the PTO and nothing happened. I tapped the PTO and it engaged and worked fine until yesterday. When I pulled the switch nothing happened .I tapped on it and it did nothing. I tapped it a lot, nothing. When I turned on the key and pulled out the PTO switch there was no clicking sound. I checked the ohms on the PTO today and it showed 3.7 which should be good. So that leaves the switch. I'm not sure how to determine if there's a problem with the switch. On the PTO there's a blue wire and a red wire. I checked the continuity of the blue wire to the switch and nothing, no beep. The red wire must go to the ignition switch I'm guessing. The PTO switch does not appear to have any melting issue. I'm stumped at this point and I hope someone here is familiar with this problem. Unfortunately I'm in Fl and the grass still needs cutting. I have my 127 but one of the spindle pulleys need replaced. Just can't get ahead.
I appreciate any help that you can give.
Thanks, Mike
|