Quote:
Originally Posted by ironman
This is the tractor rack I made a few years ago.
I use Harbor Freight ramps to access.
The only drawback is, if there is a mower deck on the tractor, it catches at the angle where the ramps meet the rack.
|
You could join the 2 ramps with a metal beam of some kind then once the tractor with the deck is parked on the ramp you could either jack up the ramps from the back or use an overhead electric (or chain) hoist to lift it until level then roll the tractor onto the stand. Just a thought. I use an electric hoist to lift the front (or rear) of my tractors. It makes it so much easier to remove the deck from underneath after it has been disconnected.