Remove the line off of the pump that goes to the tank and run a new short hose into your fuel can and suck fuel from the can. Purge the pump as the manual states. Start the engine and crack the 3 nuts loose on top of the injectors one at a time with the engine running to purge any air out. You will notice a different sound with the engine each time you loosen the injector line because that cylinder will not fire. If you loosen one and don't notice a difference then you have an issue with that injector, injector pump or cylinder.
If that solves your problem you need to pull the tank and the bungs then wash the tank good with dawn dish soap. Get the tank dried out and install new tank bungs, shut off valve and all fuel lines. Good luck and keep us posted.
__________________
This ain't no hobby....it's an addiction
|