Quote:
Originally Posted by Jamocha
Recently got a 1A tiller and I need the belt that goes from the pulley to the gearbox. Anyone know where I can find one that is cheaper than from CC? I have seen some but they appear to be 13/32 x 53 3/8, not 13/32 x 53
|
The 3/8" should be able to be within with the belt adjustment tolerance.
That equates to 3/16 of an inch in the adjustment.--(3/8 divided by half)
if you think that short belt is expensive, do not look at the price of the L-O-N-G
belt!
