I meant XT-1 sorry...
I have tried to get an answer before but here goes...
My mower was cutting uneven, I bought two deck leveling gauges and checked the side to side with the deck lever set at 3"... one side was at 3" the other was at 2 1/2"... so I adjusted it up so the blades were both cutting at 3". Now my deck height lever no longer goes up to the 4" spot, the leveling screw underneath hits the tractor body... thoughts?
here are my numbers:
tires rear 10psi front 12psi
blade height side to side 3"
blade height front and back front 2 3/4" back 3 1/4"
thoughts? does this sound right?
Thanks...
