Stuck Lift Bracket (1914)
I noticed my deck wasn't floating mid swap (44C --> 54 GT).
Best I can figure is the collar on the lift brkt must be seized to the shaft that goes through both brackets and the frame. Any movement of the cylinder is mimicked by the deck, even though the lift bracket clevis pin isn't touching the lift arm.
I have it soaking with kroil now and verified there's no bolt though the weld nut or anywhere else. Some gently prying/tapping didn't yield anything.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, 42" Blade, 020" Over K301 * 1711 | 50C Deck, #1 Rototiller w/ Extensions, Sleeve Hitch, CH18S * 1811 | 46 GT Deck, 42" Blade, M18, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck * 1914 | 44C Deck, KT17 Series II * 127 * 1650 Twin Stick | 50C Deck, 42QA Snow Thrower, K341 * 1862
|