[vbob01]

All I had to do is open up the holes for access to filler and override lever, then
I drilled out holes for upper back panel mounts and fed larger bolts thru from inside and locked them down with nuts, spaced for outer edges and used washers to catch and tightened them down. By leaving spacer out underneath and using it to sandwich original hitch the top laid back and it clears fenders fine. I realize that you can't see that as fenders are off to repair cracks in them at this time.

:biggrin2.gif::biggrin2.gif: WOW I managed to upload pictures!:biggrin2.gif::biggrin2.gif:

Hope this helps.



/attachment.php?attachmentid=7456&stc=1&http://www.onlycubcadets.net/forum/attahttp://www.onlycubcadets.net/forum/attachment.php?attachmentid=7458&stc=1&d=129478694 6chment.php?attachmentid=7457&stc=1&d=12947http://www.onlycubcadets.net/forum/attachment.php?attachmentid=7459&stc=1&d=129478694 686946d=1294786946[/url]