By Gap..
Set your points to somewhere between .015 to .020 of an inch and see where it runs best.
By VOM or DVM..
Attach one lead on the Motor Ground and the other on the "screw terminal" of the points. Points are closed. Adjust the points to where they just begin to open at the "S" mark on the flywheel in relationship to the sight hole.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|