If you want to put a sleeve hitch style lift on you 1811, you basically need a lift for a 782. The only difference would be the lower bracket that bolts to the differential. As far as the lift bar, it uses a straight lift bar. The lift bar with the bend is for manual lift tractors. For a lower bracket, I would buy one here: http://www.xtrememotorworks.com/. I would highly recommend a the "dual tab with ears" model. You can go either way with the 3 or 4 hole bracket. I don't think I've ever seen anyone using a 4 hole bracket at plowdays, so I would save the extra money and get a 3 hole. With the aluminum rearend in the 1811, you pretty much have to have the "Ears" for support so you don't pull the bolts out of the housing.
AJ
__________________
1980 [COLOR="Red"][/COLOR]482- Stock
1981 [COLOR="Red"][/COLOR]582- Mag18, Sleeve Hitch, Spring assist
1979 [COLOR="Red"][/COLOR]682- Mag18, Sleeve Hitch, Spring Assist, #1 Tiller
1980 [COLOR="Red"][/COLOR]782- Mag18, Sleeve Hitch
1983 [COLOR="Red"][/COLOR]982- Stock, Fully Optioned
|