I don't really have many more pictures, unfortunately. It's pretty simple; it's just a mule drive and deck carriage with a piece of heavy (something like 4x4x.375) angle iron welded across the back of carriage with some heavy-wall square tubing welded to that for the blade to pivot on. There is a brace that bolts to a couple holes in the frame that keeps the carriage from moving side-to-side. It is made with 1.25x1.25x.25 angle iron and some 1" pipe. The blade is a worn-out freebie from some off-brand machine. I still need to add a cutting edge; as you can see, it is worn very unevenly.
|