[cubs-n-bxrs]

Mooner I used 7/16-20 x 1 1/2 grade 5 bolts that I got at my local NAPA store.
I cut the hex head off with a cut off wheel and cleaned up the cut area on a belt sander and added a little chamfer. Next I coated the end to be threaded into the hub with 682 green loctite and threaded the studs in flush with the back. Let it set up for an hour and you are good to go. I could have just used longer bolts and threaded in from the backside but didn't want to see the bolt heads on the inside of the hub. Add 10 lug nuts and you are done.