[HKTackdriver]

Originally Posted by _DX3_

WOW! You just found what I would call a hidden treasure.
Your 122 was made in June of 1967. The small handle below the shifter is for the creeper gear. You have a 3 point sleeve hitch lift on the back, and all sorts of really nice implements.

I would start with the carb. Clean it up and rebuild it. Change the oil. Put some new points and condenser and spark plug and see if you can get it to running if the motor is able to turn over by hand. Then from there you can kind of see what is working and is not working. I would try to get it mechanically correct then worry about making it look good.

LINKS of interest:

Here is a link for the Service manual: http://www.onlycubcadets.net/forum/s...ead.php?t=4641

Procedure for setting the points and timing:
http://www.onlycubcadets.net/forum/s...ead.php?t=4405

Owners Manual: http://www.onlycubcadets.net/forum/s...ead.php?t=4662

Wiring Diagrams: http://www.onlycubcadets.net/forum/showthread.php?t=35

Rebuilding the Carb: http://www.onlycubcadets.net/forum/s...ead.php?t=4376

The information you provided is invaluable, thank you for the time you took in putting it together!