Quote:
Originally Posted by CC1450
I must be nearing the age where I need to get my eyes checked, there are numbers on it. 237406. I also noticed my digital caliper has measurements on it, for cases such as this when the battery is dead. 
Piston measures approximately 88mm in diameter across the sides without damage. I am not able to pull anything up by those numbers, and the piston part number on parts tree does not match that number on the piston I have at all.
That is solid advice Robert thank you. I'm still deciding what to do but I am thinking there is no point hoping for a quick or cheap fix for this mill at this point. I've got it this far apart, may as well do it right if I want to run this for any length of time. |
I think the stock measurement for the piston in standard measurements are 3 3/8" or 3.375", I don't know what that converts to in metric measurements.
__________________
Jeff
Brookfield, MO
________________
IH Red 782 with weights and sleeve hitch!
IH snow blade, Brinly plow, Brinly disk, Brinly harrow, Johnson rear blade, and a #2 IH Cart
|