14 hp carb issue
I'm helping a friend with his 1450 and I can't figure out what's going on with the carb. First of all, it's a K321 14hp with a #26 carb and I believe it's supposed to have a #30 carb. The carb has been rebuilt and the float is set correctly. I've adjusted the needles and got it to run great at wide open and at idle. The problem is, it won't run worth a darn between 1/4 and 3/4 throttle. If I go from idle to wide open quickly it will sputter and almost die before it gets up to max RPM. If it try to increase engine speed slowly it will die just above idle. Anyone have any suggestions?
__________________
Adam
1964 Model 100 w/ K301 12hp and custom hydraulics
1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone
|