need help
I have a 1450 that spontaneously wont run right. Has 120+ lbs of compression, is getting fuel, and has good blue spark. I keep trying to time it with the static method, but I can not find any marks on the flywheel. I've tried gapping the points anywhere from 10 thou all the way up to 35 thou in 5 thou increments and still no luck. My current question is, how long should the points pin be(the pin that rides on the cam and pushes open the points)? Here after bit I will take it out and measure it.
any advice is appreciated. Btw, I have also swapped on known good coil, points, condensor, and spark plug.
|