[jbollis]

I started to work on the cab today. I am going to restore or refurbish this and thought some would like to see the steps I take, so I will periodically be updating this.

I found it to be in worse shape then I had thought it was. Nothing That makes it not worth fixing, just more work then I was planing. It has some pretty bad rust issues. I got everything but the inside of the roof wire wheeled down to bare metal. The white paint on it is just not wanting to come off. I sprayed it with some oven cleaner and will let it set till tomorrow. That should help it come off easier. I think I will just give a full coat of por-15 then prime and paint on top of that. The por-15 should keep any of the rust from coming back.

I also drew up a print for my buddy that owns a sheet metal shop, so he can cut and bend the piece that I am missing that mounts everything to rear fender. This cab is not for a cub cadet. It is about 3 inches wider then the fenders. I had to get creative with the mounting piece, but it should look good when it's done.

Found some stress cracks in places. Both sides just below the windshield. Also found 2 cuts that po must have done for some reason. the cuts are on the lower part of the rear section. I can't even think of why they would have done that.

This is what I started with.