jpackard56 that pittman arm is off of a steering knuckle from a 2185 cub. The original square hole was 5/8th and I milled it out to 3/4' for a little more durability. The round shaft is a 1" solid piece of tool steel that is more than capable of lifting a 100lb plow in the air.
Yamaguy whats the point of spending 60-100$ on a set up when I can build one for nothing. And I got the satisfaction saying I built this myself.
Matt clamping that to the rock shaft will be fine. Doesn't even move a 1/4 turn and is a press fit on top of that. For added protection I will be using green Loctite when it is finished assembled. The end of the shaft is square where the pittman arm is fastened so there will be no slippage anyway.
__________________
149,682,1641,1711 with a 12hp in it 1 8" brinly plow 1 10" brinly plow 451 snow blower,H-48 International snow thrower 42" york rake with fold down grader blade.
|