[Jeffro]

Hey everyone! I have a few questions, and I suppose I'll give you the back story first:

About a year ago I bought a Cub Cadet 1512 to replace a Troybilt Tractor I had that had a blown engine. Half the reason I bought this is the implements and everything that came with it: A 50 inch deck, a hydraulic plow and a snow blower. The downside, was that the guy I purchased it from had decided to run the snow blower on his gravel driveway and ended up breaking the roller chain.

Long story short, he started taking apart the blower and I purchased all the "parts" along with everything else that worked. Since I was going into winter, I opted to use the plow last year. It is now time to figure out the problems with the blower, and I'm stuck in a few places.

First of all, the belt I was given is either to large (stretched out) or more likely there is a way to adjust the blower to take the belt that I am not seeing. Can anyone explain to me what I might need to do?

I also have a few smaller parts I can not figure out where they belong for the life of me. I've attached a couple pictures to look at. The first I have no idea. The second may or may not be a part of the blower - I found it laying next to the spare parts I had stashed for the blower, but don't know what it would go to. The last 3 are just pictures of what I'm looking at.

The blower is a model H42 K according to the plate. Any help and/or pictures anyone could provide would be great. Thanks!