Well I got one off,supported the bearing flange between two 4x4 blocks and used a 10lb sledge on it and after about 5 wacks it popped off! Now for the middle one. The reason I am doing this is had to cut one stinking bolt off with the grinder,wasn't enough left to use a socket on. The first pulley was rusted away. I should have taken the bolt off the pulley before I removed the spindle assembly from the deck,may have to bolt the two remaining back up and put the blade on and try to wedge it to break it loose. I have been using kroil thats my preferred penetrating oil,not cheap but like it better than pb blaster.Hope to get some done tomorrow evening,broke my cheap-o vise trying to loosen the nut on to top the middle pulley tonight.Thanks for all your help guys!
__________________
Brian
April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
|