Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Guest, We have turned off the forum to guest. This is due to bots attacking the site. It is still free to register.

-->
Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)
Reload this Page Heavy duty spindles
Register FAQ Calendar

Notices

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 01-18-2014, 06:29 PM
ken6x6's Avatar
ken6x6 ken6x6 is offline
Senior Member
  
Join Date: Apr 2012
Location: New Jersey
Posts: 586
Default Heavy duty spindles
i was wanting to see if anyone has done the heavy duty spindle swap to the front wheels. i saw one member with it done but i cant seem to find out who it was. i think it would be a good modification to my 1772 with the KW loader. so far the OEM ones have held up, but with a few hundred lbs. in the bucket who knows for how long. i see there is a kit from Xtream that looks good. if anyone has done this id love to see how its done and how it holds up. thanks!!
__________________
127 - 48'' deck + tiller.
1512- 46" GT deck & bagger
1872- 60" Haban
1772 turbo diesel- Iron rear + KW loader + backhoe + 3 point.
Case 580CK
Ford 850
International TD-8E
Reply With Quote
  #2  
Old 01-18-2014, 06:44 PM
TIMCRUTCHER TIMCRUTCHER is offline
Senior Member
  
Join Date: May 2013
Location: Kentucky
Posts: 312
Default
I did it. Check my post. I used 1500 lb. 1 1/2 square spindles and machined a block to give correct angle. PM me for pics.
Reply With Quote
  #3  
Old 01-18-2014, 06:48 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,880
Default
Quote:
Originally Posted by TIMCRUTCHER View Post
I did it. Check my post. I used 1500 lb. 1 1/2 square spindles and machined a block to give correct angle. PM me for pics.
What post would that be?
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #4  
Old 01-18-2014, 06:56 PM
TIMCRUTCHER TIMCRUTCHER is offline
Senior Member
  
Join Date: May 2013
Location: Kentucky
Posts: 312
Default
Spindle laid out to weld.

image.jpg
Reply With Quote
  #5  
Old 01-18-2014, 06:58 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,880
Default
Quote:
Originally Posted by TIMCRUTCHER View Post
Spindle laid out to weld.Attachment 46297
Put up a post about the spindle upgrade, looks beefy to me.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #6  
Old 01-18-2014, 06:59 PM
TIMCRUTCHER TIMCRUTCHER is offline
Senior Member
  
Join Date: May 2013
Location: Kentucky
Posts: 312
Default
Finished

image.jpg
Reply With Quote
  #7  
Old 01-18-2014, 07:07 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
  
Join Date: Feb 2010
Location: Galax VA
Posts: 18,880
Default
Quote:
Originally Posted by TIMCRUTCHER View Post
Your not getting off that easy, we want details and more pics. Don't try holding out on us now

Do a new thread on your upgrade
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #8  
Old 01-18-2014, 07:27 PM
TIMCRUTCHER TIMCRUTCHER is offline
Senior Member
  
Join Date: May 2013
Location: Kentucky
Posts: 312
Default
I did not take pictures. I'll try to explain what I did. I cut two 2"x2" blocks of 1" steel. Drilled a 1" hole in the center and milled a 1-1/2 groove in the bottom at an angle to match the original spindle. It was about 1/4" on the inside out to almost nothing on the outside.

I cut the factory spindles about 3/4" below the axle and welded them from the bottom to the blocks I made then welded the 1-1/2" spindle in the machined groove.

I took some 10"x6" trailer wheels and narrowed them to 4" and mounted tri-rib tires.

image.jpg


I may just have too much time on my hands.
Reply With Quote
  #9  
Old 01-18-2014, 08:03 PM
TIMCRUTCHER TIMCRUTCHER is offline
Senior Member
  
Join Date: May 2013
Location: Kentucky
Posts: 312
Default
Extreme Motorworks offers this service. I have bought several of their products and am very satisfied. They are good people to do business with.

I just opted to this on my own.
Reply With Quote
  #10  
Old 01-18-2014, 08:07 PM
ken6x6's Avatar
ken6x6 ken6x6 is offline
Senior Member
  
Join Date: Apr 2012
Location: New Jersey
Posts: 586
Default
looks pretty good. ill have to figure out a way to get the correct pitch since i don't have a mill. maybe i could miter cut the steel to 15* or so.

how are they holding up and do you notice any differences?
__________________
127 - 48'' deck + tiller.
1512- 46" GT deck & bagger
1872- 60" Haban
1772 turbo diesel- Iron rear + KW loader + backhoe + 3 point.
Case 580CK
Ford 850
International TD-8E
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:35 AM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.