|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
03-24-2017, 03:02 PM
|
||||
|
||||
Wheel stud knurl diameter ?
Guys
I need the knurl diameter for a Cub wheel stud. Cub part number is 710-0852. I need to replace the studs on one of my Cyclops with something longer. Stock is 1.6" long and I need at least 2". Here is a pic showing the area I need measured. Thanks in advance.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL 
|
|
#2
03-24-2017, 04:42 PM
|
|||
|
|||
|
I measured some I had replaced and it was .460
BTW you are supposed to answer questions, not ask them.
__________________
I don't use my Cub. I just work on it and look at it. So far it's holding up very well.
|
|
#3
03-24-2017, 05:13 PM
|
||||
|
||||
|
Quote:
Reason for this is that I got an 1863 carcass and a set of 10" wide JD wheels a few years ago from Leadslingingdaddy that I made into a 1641. The backspacing on the wheels caused the rim to hit the brakes. I put a 3/8" spacer on it and all was good. Fast forward to last week and I decided to switch mower decks from the 48 I had on it to a 46 and the tires hit the deck. I ended up putting a set of Cub wheels on that tractor but I need to correct the problem so that I can use the JD rims on my 1864. The studs are too short to use the JD wheels on the tractor that I want to put the JD wheels on, I can only get about 3 threads to catch. My guess is someone changed the studs on the 1863 because it looks like all the stuff I researched use the same stud. I can get longer studs, just needed to know what size to order and you had the answer. Off to Summit Racing we go. 
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#4
03-24-2017, 10:38 PM
|
||||
|
||||
|
Sam - NAPA has a wide selection of wheels studs available if Summit doesn't pan out.
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper,
|
|
#5
03-26-2017, 02:24 PM
|
||||
|
||||
|
Plan B, just happened to look at my 149. I thought it had 23X8.5-12 tires on a 12X7 rim's it but it has 23X10.5-12 tires on a 12X8.5 rim's so what I'm going to do is replace the bolts on the 149 with 3" long studs then I can use my spacers and the JD wheels on the 149 and put the wheels from the 149 on the 1641. The bolts are a PITA anyway so 2 problems solved for cheap money. McMaster has the studs and lug nuts with very good prices.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#6
03-29-2017, 05:42 PM
|
||||
|
||||
|
Got the studs and nuts today from McMaster. Mission accomplished. Any of you guys need 10 wheel bolts for the older tractors? $10.00 shipped.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#9
03-31-2017, 04:45 PM
|
||||
|
||||
|
__________________
This ain't no hobby....it's an addiction
|
|
#10
03-31-2017, 05:07 PM
|
||||
|
||||
|
Quote:
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
