Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Guest, We have turned off the forum to guest. This is due to bots attacking the site. It is still free to register.

-->
Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2013, 10:26 PM
bocephus1991's Avatar
bocephus1991 bocephus1991 is offline
Grand Member
 
Join Date: Nov 2010
Location: Jefferson City, Missouri
Posts: 2,633
Default 1211 to 1282 conversion ignition help

I am installing a k301aqs into an 1211 basically making it a 1282. I replaced the 1211 ignition switch with one for a 1282. I then put the battery in an used a test light on the main wiring harness connector to see which wires had power in the key on and crank positions and noted that . Then I did the same using my 1200 cub (as a guide)then I wired the 1211 like the 1200 ,using blade connectors I did not splice into the 1211 harness. I tried it and it cranked. Then when I try to start it there is no fire to the plug until the key is in the run position. So I switched them I thought,tried that and had fire when cranking and none in the run position. What am I doing wrong here? Its something simple I'm sure it did fire a few times wanted to start but when I let the key back to run position it wouldn't run. I apologize I'm no wiring expert so..lol Thanks for any advice or suggestions and help I appreciate it!
__________________
Brian

April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
Reply With Quote
  #2  
Old 10-10-2013, 12:24 AM
J-Mech J-Mech is offline
Banned
 
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default

Quote:
Originally Posted by bocephus1991 View Post
Then when I try to start it there is no fire to the plug until the key is in the run position. So I switched them I thought,tried that and had fire when cranking and none in the run position.
Switched what?
Reply With Quote
  #3  
Old 10-10-2013, 07:55 AM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,684
Default

There are two different Wiring Diagrams for the 1211 depending on the chassis serial number range.

What is the chassis serial number of your 1211...???
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #4  
Old 10-10-2013, 08:49 AM
bocephus1991's Avatar
bocephus1991 bocephus1991 is offline
Grand Member
 
Join Date: Nov 2010
Location: Jefferson City, Missouri
Posts: 2,633
Default

J-mech I switched the blade plug in's around and then had fire when cranking and none in the run position. The firstime I had fire in the run position none in cranking. On the main wiring harness connector on the 1211 there is two white wires going into one blade a yellow wire and a orange wire. tractor serial number is 763614 mfg date d097g
__________________
Brian

April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
Reply With Quote
  #5  
Old 10-10-2013, 09:20 AM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,684
Default

If you want, I will figure out how to configure your wiring dilemma. Let me know.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #6  
Old 10-10-2013, 03:07 PM
bocephus1991's Avatar
bocephus1991 bocephus1991 is offline
Grand Member
 
Join Date: Nov 2010
Location: Jefferson City, Missouri
Posts: 2,633
Default

sent you a pm Roland
__________________
Brian

April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
Reply With Quote
  #7  
Old 10-10-2013, 05:00 PM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,684
Default

Diagram sent to the E-mail address listed in your profile.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #8  
Old 10-10-2013, 10:56 PM
bocephus1991's Avatar
bocephus1991 bocephus1991 is offline
Grand Member
 
Join Date: Nov 2010
Location: Jefferson City, Missouri
Posts: 2,633
Default

Roland here is a pic of the main harness connector with the orange wire
Attached Images
File Type: jpg DSCN3201.jpg (21.3 KB, 85 views)
File Type: jpg DSCN3200.jpg (21.4 KB, 84 views)
__________________
Brian

April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
Reply With Quote
  #9  
Old 10-11-2013, 07:29 AM
R Bedell R Bedell is offline
Founding Member
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,684
Default

You gave me a Chassis Serial Number of 763xxx. According to the Diagram for 757xxx & above there is NO orange wire.

NOW...........if you go the Diagram for <757xxx there was an Oil Pressure Switch that used an orange wire.

In your case. DISREGARD the orange wire and do not use.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #10  
Old 10-11-2013, 09:03 AM
bocephus1991's Avatar
bocephus1991 bocephus1991 is offline
Grand Member
 
Join Date: Nov 2010
Location: Jefferson City, Missouri
Posts: 2,633
Default

yes the serial number is 763614 model#147630100
__________________
Brian

April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.