Using Napa replacement Kohler parts?

[gdheck]

Anyone on here have anything they can tell me about Napa replacement parts for a K-301? I normally only use genuine Kohler parts, but I have been thinking about trying Napa's line of parts. I'm interested in a piston and rings, rod and valves. I've always wondered if they would be inferior to genuine Kohler, but I can get them for about 1/2 the price of Kohler parts.

[finsruskw]

I'm about to start on my 3rd engine rebuild using NAPA Stuff.
Its a 12 HP from the 126. Matter of fact, they just called this AM and said it was ready to pick up
The other 2 were a 12 and a 14 from my QL's.
So far so good.

[Merk]

I've been using NAPA parts for several years with no problems. My 100 has a rebuild engine kit from NAPA in it. Anyone at a plow day knows I will pull RPMs down from 3800 rpm to 2800-2900 rpm and run that way all day long.

[_DX3_]

I buy so many parts there that my NAPA dealer has started giving me a small engine parts book when each updated book comes out.

[Sam Mac]

Last set of head gaskets I bought for a Mag18 from NAPA were Kohler parts and about 1/2 the price of the local "authorized" Kohler dealers.

[gsomersjr]

My local NAPA offers both genuine Kohler parts and private label NAPA Small Engine Parts. I've never had a failure with either brand.

[crossingcrown]

I don't want to get shot here, This might even need to get moved to Custom Cadets.. But while we are talking about Napa!! Is there Napa list parts for other things also? The filters and parts, or what not.. hydro filters, air filters..

[darryljs]

Originally Posted by crossingcrown

I don't want to get shot here, This might even need to get moved to Custom Cadets.. But while we are talking about Napa!! Is there Napa list parts for other things also? The filters and parts, or what not.. hydro filters, air filters..

Here's a list of some stuff I found from NAPA. I think there may be more things. Hope you find this useful.

Cross Reference Cub Cadet to NAPA

Tie rod end CCC # 723-3018 NAPA # 7-04231

3/4" wheel bearing IH # 394883R93, NAPA # 7-04292

1" wheel bearing CCC # 741-3002, NAPA # 7-08412

Electronic Voltage Regulator plug NAPA # 7-016008

5 prong ignition switch plug NAPA # 7-016034

Breaker points Kohler # 47-150-03, NAPA # 7-01029

Condenser IH # 62188C1, Kohler # 230722-S, NAPA # 7-01338

Muffler, models 102-149 IH # 393840R91, NAPA # 7-03680

Hydro filter CCC # 723-3014, NAPA # 1084

Hydro filter for auto gear pump CCC # 723-3014, NAPA # 1410

Rear wheel seal CCC # 721-0187, NAPA # 9878

Hydro input seal IH # 394847R91, Sundstrand # 9008000-6201 NAPA # 6204

Hydro trunion seal SN 592014 & below IH # 383534R91 NAPA # 6720

Hydro trunion seal SN 592015 & above Sundstrand # 9008000-6701 NAPA # 6763

PTO bearing, models 70-169 IH # 60071C91 NAPA # RA100RR and PRA100RR (cheaper version)

Engine oil filter Kohler 52-050-02-S, NAPA # 1348

Engine oil filter Kohler 12-050-01-S, NAPA # 1056

Shaft seal for Narrow Frame Hydraulic lift pump IH # 347478R91, NAPA # 4911

Sway bar repair kit to replace Quiet Line ISO mount rubbers NAPA # 265-1285

Spark Plug Cross Reference Chart
Engine – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP)

Manufacturer and Number ------- Mfgr. Stock Number
Champion H10C --------------------- 844
Denso W14L --------- -------------- 6013
NGK B4L ---------------------------- 3112
14mm, 7/16 reach, 13/16 hex. These plugs recommended for stock engines.

Engine* – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP)

Champion H8C ------------------------ 587
14mm, 7/16 reach, 13/16 hex.
*These are colder heat range plugs for use in modified engines with higher than stock compression ratios.

Engine – Kohler K141 (6.25 HP), K161 (7 HP), K181 (8 HP)

Champion J8C ------------------------- 841
14mm, 3/8 reach, 13/16 hex.

Engine – Kohler KT17 Opposed Twin
Champion RV17YC --------------------- 25
14mm, .460 reach, 5/8 hex.

Engine – Onan 20 HP Opposed Twin
Champion RC14YC --------------------- 431
14mm, 3/4 reach, 5/8 hex.

[bocephus1991]

I've used napa coils and points an condensers with no problem. I didn't see it listed but the air filter is #2296 gold series $20 fits the k- series. Tried the one from tsc and its to small.

[TheSaturnV]

darryljs,

Outstanding list.

Take these numbers and head to Tulsa Engine Warehouse:

http://tewarehouse.com/Catalog

Plug any part number you can into the search. Great folks and some of the cheapest prices I've found online.

As always, support your local businesses or the sponsors here if price + shipping is close.