![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I had oil EVERYWHERE in the 782 yesterday. I started the tractor and let it idle in the yard for a few minutes while I loaded some wood in the trailer. After puttering over to the wood pile I drove back past the spot where it warmed up and saw oil on the grass. Lift the hood and wow! Oil blowing out both engine side covers. Engine was running fine when I shut it down and it took 32 oz (48 oz capacity) of oil to get back on the dip stick. After removing the side covers it sure looks to me like a rear seal. The engine is prepped to come out of the tractor today. The drive shaft didn't appear to have any radial motion so I don't think it's the bearing. Boy am I glad I drove back past that spot yesterday, as I had a long list of chores for the 782 that would probably not have ended well. Anybody had any experience with such a significant leak like this?
|
|
#2
|
|||
|
|||
|
As a suggestion, while you have the engine out, look closely at the "breather assembly". It has been updated and I would suggest you do so.
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1: |
|
#3
|
|||
|
|||
|
10-4. Prior owner put a short block in probably 10 years after the original. The breather assy is a rubber flap and a very coarse filter/screen if my memory serves me well. Are you referring to possible crankcase pressure causing a seal failure? Pictures coming after work. BTW I checked compression a few weeks back while dealing with a fuel delivery issue and fuel pump replacement. 120 psi and 125 psi. Thank you!
|
|
#4
|
|||
|
|||
|
Quote:
__________________
[B]Roland Bedell[/B] CC Models: 100, 105, 1450, 782, (2) 784, & 2072 [SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1: |
|
#5
|
|||
|
|||
|
Well the oil leak didn't start on Monday as I had thought. The rear tin was packed with crud. Got the engine out and today will pull the flywheel. On the last photo there is a plug in the front of the engine just below the oil filler neck that looks to have a minor leak as well. Why is that there and how do I pull it and re-seal?
010.jpg013.jpg |
|
#6
|
||||
|
||||
|
You may want to download the manual for the engine, here is the link.
http://www.onlycubcadets.net/forum/s...ead.php?t=4649
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.